Image
BUY NOWFree Shipping in USA, International Shipping Available

JuiceBox Zero is designed specifically for the Raspberry Pi Zero to let you power it from a battery. It’s the simplest way to properly power your Pi Zero with a battery. It is the only battery management board in this form factor that requires no code. With JuiceBox Zero, you get the best solution for instant Pi Zero portability. It comes with an on/off switch, status indicator LED and Pi Zero Camera mount built right in!

Battery and Raspberry Pi Zero not included. All you need to get started is your JuiceBox Zero, a Raspberry Pi Zero, Zero W or Pi Zero 2 W, a stacking or non-stacking header connection, and a JST‑compatible, single‑cell lithium‑ion battery.

Battery and Raspberry Pi Zero not included.

Battery and Raspberry Pi Zero not included.

Image

Technical Specifications

Image

Battery Power

Compatible with any 3.7 to 4.2V Lithium-Ion or Lithium-Polymer battery with a JST PH connector, 1A Current Output and 1A Charge rate.
Image

Low Power Threshold

Power levels at or below 3.2V illuminate the low battery LED and trip a software trigger tied into GPIO 16 (can be changed to GPIO 25). GPIO trigger use is not required for operation.
Get the GPIO trigger code
Image

Micro USB Power

Requires a 5V power supply, and can draw up to 2A. Can both charge the battery and power the Raspberry Pi at the same time. Caution: Do not power your Raspberry Pi and JuiceBox Zero simultaneously. This can cause damage to both devices.
Image

Pi Compatibility

Compatible with Raspberry Pi Zero, Pi Zero W, and Pi Zero 2 W models. May also be suitable for powering other Pi models.

Based on the PowerBoost 1000c design by Lady Ada

Copyright © Adafruit Industries 2015 • License: CC BY-SA 3.0

JuiceBox Zero © 2023 • JuiceBox Zero is not affiliated with or endorsed by Adafruit Industries or The PiHut